Home › BODY ELECTRICAL › AUDIO / VISUAL › RADIO ANTENNA CORD

RADIO ANTENNA CORD > INSTALLATION

for Preparation Click here



1. INSTALL NO. 2 ANTENNA CORD SUB-ASSEMBLY
  1. Attach the 3 clamps and 2 claws to install the antenna cord.



  1. Connect the connector.


    I038961E02



2. INSTALL INSTRUMENT PANEL SUB-ASSEMBLY
  1. Install the instrument panel (Click here).



3. INSTALL ANTENNA CORD SUB-ASSEMBLY
  1. Attach the 10 clamps. Install the antenna cord with the bolt.

    Torque:
    7.0 N*m{ 71 kgf*cm , 62 in.*lbf }



  1. Connect the connector.


    I038874E02



4. INSTALL ROOF HEADLINING ASSEMBLY
  1. Install the roof headlining (Click here).



5. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL


6. PERFORM INITIALIZATION
  1. Perform initialization (Click here).

    NOTICE:
    Certain systems need to be initialized after disconnecting and reconnecting the cable from the negative (-) battery terminal.