Home › BODY ELECTRICAL › AUDIO / VISUAL › RADIO ANTENNA CORD

RADIO ANTENNA CORD > REMOVAL

for Preparation Click here



1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

CAUTION:
Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to prevent airbag and seat belt pretensioner activation.



2. REMOVE ROOF HEADLINING ASSEMBLY
  1. Remove the roof headlining (Click here).



3. REMOVE ANTENNA CORD SUB-ASSEMBLY



I038874E02

  1. Disconnect the connector.

  1. Remove the 10 clamps, ground bolt and antenna cord.



4. REMOVE INSTRUMENT PANEL SUB- ASSEMBLY
  1. Remove the instrument panel (Click here).



5. REMOVE NO. 2 ANTENNA CORD SUB-ASSEMBLY
  1. Disconnect the connector.



  1. Detach the 3 clamps and 2 claws, and then remove the antenna cord.


    I038961E02