Home › SECURITIES › ENGINE IMMOBILISER › CERTIFICATION ECU (w/ Smart Key System)

CERTIFICATION ECU (w/ Smart Key System) > INSTALLATION

for Preparation Click here



1. INSTALL CERTIFICATION ECU (SMART KEY ECU ASSEMBLY)


    B182081
  1. Install the certification ECU (smart key ECU assembly) with the 2 screws.

  1. Connect the connector.



2. INSTALL INSTRUMENT PANEL SAFETY PAD
(Click here)


3. REGISTER ECU COMMUNICATION ID

NOTICE:
When replacing the certification ECU, perform initialization (Click here).



4. REGISTER KEY

NOTICE:
When replacing the certification ECU, perform initialization (Click here).