Home › Engine / Hybrid System › 1NZ-FXE (ENGINE CONTROL) › CAMSHAFT OIL CONTROL VALVE
RM2170E _51 Engine / Hybrid System _057003 1NZ-FXE ENGINE CONTROL _0277912 CAMSHAFT OIL CONTROL VALVE A

1NZ-FXE ENGINE CONTROL  CAMSHAFT OIL CONTROL VALVE  INSTALLATION  


PROCEDURE

Hide 11101J 1.INSTALL CAMSHAFT TIMING OIL CONTROL VALVE ASSEMBLY

a.
A279116E01
0.534,0.176 0.711,0.464 0.177,0.288 10 *1 1.624,1.014 0.97,0.262 0.97,0.262 0.732,0.262 false

Apply a light coat of engine oil to a new O-ring and install it onto the camshaft timing oil control valve assembly.

Text in Illustration
*1 O-ring

NOTICE:

Do not twist the O-ring.



b.

Install the camshaft timing oil control valve assembly and wire harness bracket with the bolt.

Torque:
7.5 N*m (76 kgf*cm, 66 in.*lbf)


c.

Connect the camshaft timing oil control valve assembly connector.


Hide 2.INSPECT FOR OIL LEAK