Home › Engine / Hybrid System › 1NZ-FXE (ENGINE CONTROL) › ENGINE COOLANT TEMPERATURE SENSOR
RM2170E _51 Engine / Hybrid System _057003 1NZ-FXE ENGINE CONTROL _0277918 ENGINE COOLANT TEMPERATURE SENSOR A

1NZ-FXE ENGINE CONTROL  ENGINE COOLANT TEMPERATURE SENSOR  REMOVAL  


PROCEDURE

Hide G9200 2.REMOVE INVERTER WITH CONVERTER ASSEMBLY

Hide 89422 3.REMOVE ENGINE COOLANT TEMPERATURE SENSOR

a.
A267835

Disconnect the wire harness.


b.
A267834

Disconnect the engine coolant temperature sensor connector.


c.
A267836E03
1.427,1.417 2.167,0.823 2.167,0.823 2.615,0.823 false 1.146,2.604 1.146,2.823 false 2.646,0.729 2.844,0.958 0.198,0.229 10 true *a 1.052,2.823 1.219,3 0.167,0.177 10 false *b

Using a union nut wrench 19 mm, remove the engine coolant temperature sensor.

Text in Illustration
*a Union Nut Wrench
*b Gasket


d.

Remove the gasket from the engine coolant temperature sensor.