Home › Engine / Hybrid System › 1NZ-FXE FUEL › FUEL SENDER GAUGE ASSEMBLY › 2011.12–2017.06
RM2170E _51 Engine / Hybrid System _057006 1NZ-FXE FUEL _0277957 FUEL SENDER GAUGE ASSEMBLY A

1NZ-FXE FUEL  FUEL SENDER GAUGE ASSEMBLY  INSTALLATION  


PROCEDURE

Hide 83320 1.INSTALL FUEL SENDER GAUGE ASSEMBLY

a.

Install the fuel sender gauge assembly by sliding it downward.

A306882E01
0.567,0 1.197,0.509 0.631,0.509 12 *A 3.978,0 4.609,0.509 0.631,0.509 12 *B

Text in Illustration
*A Type A *B Type B

NOTICE:

Make sure that the fuel sender gauge arm does not bend.



b.
A406618C02
0.469,1.521 0.76,1.521 false 1.573,1.521 1.729,1.302 1.729,1.302 2.427,1.302 true 0.292,1.438 0.604,1.594 0.313,0.156 10 false *a 2.479,1.229 2.792,1.385 0.313,0.156 10 false *b
*a Fuel Tube
*b Wire Harness


Connect the fuel sender gauge assembly connector as shown in the illustration.

NOTICE:

Make sure that the wire harness is arranged as shown in the illustration.



Hide 77020A 2.INSTALL FUEL SUCTION TUBE WITH PUMP AND GAUGE ASSEMBLY