Home › Engine / Hybrid System › 1NZ-FXE (COOLING) › COOLING FAN SYSTEM
RM2170E _51 Engine / Hybrid System _057009 1NZ-FXE COOLING _0277971 COOLING FAN SYSTEM G

1NZ-FXE COOLING  COOLING FAN SYSTEM  ON-VEHICLE INSPECTION  


PROCEDURE

Hide 1.INSPECT COOLING FAN SYSTEM

a.

Connect the intelligent tester to the DLC3.


b.

Turn the power switch on (IG).


c.

Turn the tester on.


d.

Enter the following menus: Powertrain / Engine and ECT / Active Test / Control the Electric Cooling Fan.


e.

Check the operation of the cooling fans while operating them using the intelligent tester.

If the cooling fan motor does not operate, check the cooling fan circuit (See page Engine / Hybrid System>1NZ-FXE (COOLING)>COOLING FAN SYSTEM>Cooling Fan Circuit).