Home › Engine / Hybrid System › 1NZ-FXE (COOLING) › WATER PUMP
RM2170E _51 Engine / Hybrid System _057009 1NZ-FXE COOLING _0277974 WATER PUMP A

1NZ-FXE COOLING  WATER PUMP  INSTALLATION  


PROCEDURE

Hide 16100 1.INSTALL ENGINE WATER PUMP ASSEMBLY

a.

Install a new gasket.

HINT:

Be sure to clean the contact surfaces.



b.

Install the engine water pump assembly with the 5 bolts.

Torque:
21 N*m (214 kgf*cm, 15 ft.*lbf)


c.

Connect the 2 clamps.


d.

Connect the connector.

NOTICE:

Do not start the engine water pump assembly before adding coolant.