Home › Brake › BRAKE SYSTEM (OTHER) › BRAKE BOOSTER PUMP(for LHD) › 2011.12–2017.06
RM2170E _54 Brake _057022 BRAKE SYSTEM (OTHER) _0278035 BRAKE BOOSTER PUMP(for LHD) A

BRAKE SYSTEM (OTHER)  BRAKE BOOSTER PUMP(for LHD)  REMOVAL  


PROCEDURE

Hide 47210L 1.REMOVE BRAKE BOOSTER WITH MASTER CYLINDER ASSEMBLY

Hide 44571 2.REMOVE BRAKE ACTUATOR HOSE

a.
C268181E02
0.073,0.052 0.563,0.417 0.49,0.365 12 true *A 0.063,2.104 0.552,2.469 0.49,0.365 12 true *B

Move the clip and remove the brake actuator hose from the brake booster pump assembly.

Text in Illustration
*A for Type A
*B for Type B


Hide 47311 3.REMOVE FRONT NO. 1 BRAKE TUBE

a.
C268182E02
0.063,0.052 0.406,0.375 0.344,0.323 12 true *A 0.063,2.271 0.438,2.573 0.375,0.302 12 true *B

Remove the bolt.

Text in Illustration
*A for Type A
*B for Type B


b.

Using a union nut wrench, disconnect the brake line to remove the front No. 1 brake tube from the brake booster pump assembly.


Hide 47381 4.REMOVE NO. 1 BRAKE TUBE CLAMP BRACKET

a.
C268183E02
0.063,0.052 0.448,0.365 0.385,0.313 12 true *A 0.063,2.333 0.458,2.646 0.396,0.313 12 true *B

Remove the bolt and No. 1 brake tube clamp bracket from the brake booster pump assembly.

Text in Illustration
*A for Type A
*B for Type B


Hide 47070 5.REMOVE BRAKE BOOSTER PUMP ASSEMBLY

a.
C250035

Disconnect the 2 connectors from the brake booster pump assembly.


b.
C249857E01
0.797,2.439 0.961,2.591 0.165,0.152 10 *1 1.257,4.166 1.422,4.319 0.165,0.152 10 *2 2.961,4.001 3.126,4.153 0.165,0.152 10 *3 1.299,2.522 0.98,2.522 false 1.356,3.315 1.356,4.155 1.356,4.155 1.692,3.237 false 2.223,4.081 2.944,4.081 2.944,4.081 2.78,3.667 false

Remove the 2 nuts, brake booster pump assembly, 2 brake actuator case collars and 2 brake booster pump bushings from the brake actuator bracket assembly.

Text in Illustration
*1 Union
*2 Connector
*3 Stud

NOTICE:
·

Do not carry the brake booster pump assembly by the parts shown in bold (*1, *2 and *3) in the illustration.

·

Do not drop the brake booster pump assembly when carrying it. If the brake booster pump assembly has been dropped, replace it with a new one.

·

Be careful not to allow any brake fluid to enter the connector.

·

Do not kink or damage the brake lines. If they are damaged, replace them with new ones.




Hide 6.REMOVE FRONT WHEEL LH

Hide 51442C 7.REMOVE ENGINE UNDER COVER LH

Hide 44590 8.REMOVE BRAKE ACTUATOR BRACKET ASSEMBLY

a.
C250036

Disengage the 2 clamps to separate the frame wire from the brake actuator bracket assembly.


b.
C249860

Remove the 3 bolts and brake actuator bracket assembly.


c.
C256174

Disengage the clamp to separate the frame wire from the brake actuator bracket assembly.

NOTICE:

Do not kink or damage the brake lines.