Home › Brake › PARKING BRAKE › PARKING BRAKE LEVER
RM2170E _54 Brake _057025 PARKING BRAKE _0278041 PARKING BRAKE LEVER A

PARKING BRAKE  PARKING BRAKE LEVER  INSTALLATION  


PROCEDURE

Hide 84550 1.INSTALL PARKING BRAKE SWITCH ASSEMBLY

a.

Install the parking brake switch assembly with the screw.

Torque:
0.9 N*m (9 kgf*cm, 8 in.*lbf)


Hide 46201E 2.INSTALL PARKING BRAKE LEVER SUB-ASSEMBLY

a.

Install the parking brake lever sub-assembly with the 2 bolts.

Torque:
20 N*m (204 kgf*cm, 15 ft.*lbf)


b.

Connect the parking brake switch connector.


c.

Connect the No. 3 parking brake cable assembly and No. 2 parking brake cable assembly to the parking brake equalizer.


d.

Engage the 2 claws to install the parking brake cable stopper.


Hide 3.ADJUST PARKING BRAKE LEVER TRAVEL

Hide 58997 4.INSTALL NO. 3 CONSOLE BOX MOUNTING BRACKET

a.
C251698E02
1.51,1.719 2.333,1.719 true 2.354,1.625 2.531,1.792 0.177,0.167 10 false *a

Install the No. 3 console box mounting bracket with the bolt.

Text in Illustration
*a Stopper

Torque:
20 N*m (204 kgf*cm, 15 ft.*lbf)

NOTICE:

Securely install the No. 3 console box mounting bracket so that its stopper contacts the parking brake lever support bracket as shown in the illustration.



Hide 58995A 5.INSTALL NO. 1 CONSOLE BOX MOUNTING BRACKET

a.
C251697

Install the No. 1 console box mounting bracket with the 3 bolts.


Hide 6.INSTALL REAR CONSOLE BOX ASSEMBLY