Home › Audio / Visual / Telematics › AUDIO / VIDEO › FRONT DOOR SPEAKER
RM2170E _56 Audio / Visual / Telematics _057029 AUDIO / VIDEO _0278053 FRONT DOOR SPEAKER A

AUDIO / VIDEO  FRONT DOOR SPEAKER  REMOVAL  


PROCEDURE

Hide 1.REMOVE POWER WINDOW REGULATOR MASTER SWITCH ASSEMBLY WITH FRONT DOOR ARMREST BASE PANEL (for Driver Side)

Hide 2.REMOVE POWER WINDOW REGULATOR SWITCH ASSEMBLY WITH FRONT DOOR ARMREST BASE PANEL (for Front Passenger Side)

Hide 67602 3.REMOVE FRONT DOOR TRIM BOARD SUB-ASSEMBLY

Hide 86160 4.REMOVE FRONT NO. 1 SPEAKER ASSEMBLY

a.
E237140

Disconnect the connector.


b.
E237141

Using a drill bit with a diameter of less than 5 mm (0.197 in.), drill out the 3 rivet heads and remove the front No. 1 speaker assembly.

NOTICE:
·

Do not touch the cone part of the speaker.

·

Do not drill the rivet at an angle as this will cause damage to the drill and drill hole. Line up the drill and rivet, and carefully drill out the rivet head.

·

Be careful as the cut rivet will be very hot.




c.

Continue drilling and push out the remaining rivet fragments.


d.

Using a vacuum cleaner, remove the rivet fragments and shavings from the inside of the door.


Hide 86160P 5.REMOVE FRONT NO. 2 SPEAKER ASSEMBLY

a.
E237142

Disconnect the connector.


b.

Remove the 2 screws and front No. 2 speaker assembly.