Home › Vehicle Interior › DOOR LOCK › BACK DOOR LOCK
RM2170E _58 Vehicle Interior _057034 DOOR LOCK _0278076 BACK DOOR LOCK A

DOOR LOCK  BACK DOOR LOCK  INSTALLATION  


PROCEDURE

Hide 69350 1.INSTALL BACK DOOR LOCK ASSEMBLY

HINT:

Make sure to remove the string before installing a new back door lock assembly.


a.

Apply MP grease to the sliding parts of the back door lock assembly.


b.

Install the back door lock assembly with the 2 bolts.

Torque:
7.5 N*m (76 kgf*cm, 66 in.*lbf)


c.

Connect the connector.


Hide 67750 2.INSTALL BACK DOOR TRIM BOARD ASSEMBLY