Use the same procedure for the RH side and LH side.
The following procedure is for the LH side.
73920A
1.INSTALL FRONT SEAT AIRBAG ASSEMBLY
Do not reuse the nuts.
Make sure that the separate type front seatback spring assembly is not deformed. If it is, replace it with a new one.
Install the front seat airbag assembly with 2 new nuts.
Engage the 2 clamps.
2.INSTALL SEPARATE TYPE FRONT SEATBACK COVER WITH PAD
73920A
3.CONNECT FRONT SEAT AIRBAG ASSEMBLY
71074S
4.CONNECT SEPARATE TYPE FRONT SEATBACK COVER
5.INSTALL FRONT SEAT ASSEMBLY
6. PERFORM DIAGNOSTIC SYSTEM CHECK