72693
1.INSTALL REAR SEAT CUSHION LOCK HOOK
Engage the 2 claws to install the rear seat cushion lock hook as shown in the illustration.
Use the same procedure for the RH side and the LH side.
2.INSTALL REAR SEAT CUSHION ASSEMBLY
Place the rear seat cushion assembly in the cabin.
Be careful not to damage the vehicle body.
Push out the seat belt buckles from the back of the rear seat cushion assembly so that they are positioned as shown in the illustration.
Engage the hook of the rear seat cushion assembly to the CRS anchor bracket.
| *a | Hook |
Engage the 2 rear seat cushion lock hooks to install the rear seat cushion assembly as shown in the illustration.
Confirm that the seat cushion is firmly installed.
When installing the seat cushion, make sure that the seat belt buckles are not under the seat cushion.
Engage the 2 clips.
3.INSTALL REAR SEATBACK ASSEMBLY
Place the rear seatback assembly in the cabin.
Be careful not to damage the vehicle body.
Install the rear seatback assembly with the 2 bolts.
Raise the rear seatback assembly.
58167H
4.INSTALL FRONT CENTER FLOOR COVER
58166B
5.INSTALL FRONT FLOOR COVER LH
58165F
6.INSTALL FRONT FLOOR COVER RH
71960B
7.INSTALL REAR CENTER SEAT HEADREST ASSEMBLY
71940A
8.INSTALL REAR SEAT HEADREST ASSEMBLY