Home › Vehicle Interior › HEATING / AIR CONDITIONING › AIR CONDITIONING SYSTEM
RM2170E _58 Vehicle Interior _057042 HEATING / AIR CONDITIONING _0278125 AIR CONDITIONING SYSTEM D

HEATING / AIR CONDITIONING  AIR CONDITIONING SYSTEM  INITIALIZATION  


INITIALIZATION SERVO MOTOR


a.

Turn the power switch off.


b.

Connect the intelligent tester to the DLC3.


c.

Turn the power switch on (IG).


d.

Press the A/C OFF switch.


e.

Turn the intelligent tester on.


f.

Enter the following menus: Body / Air Conditioner / Utility / Servomotor Initialization.


g.

According to the intelligent tester display, perform servomotor initialization.

HINT:

During initialization, the A/C AUTO indicator light comes on, and then goes off when initialization has finished.



h.

According to the intelligent tester display, select the "Exit" switch to finish initialization.