Home › Vehicle Interior › HEATING / AIR CONDITIONING › AIR CONDITIONING SYSTEM › from 2014.12
RM2170E _58 Vehicle Interior _057042 HEATING / AIR CONDITIONING _0278125 AIR CONDITIONING SYSTEM A

HEATING / AIR CONDITIONING  AIR CONDITIONING SYSTEM  CUSTOMIZE PARAMETERS  


PROCEDURE

Hide 1.CUSTOMIZE AIR CONDITIONING SYSTEM

a.

Customizing with the intelligent tester

NOTICE:
·

When the customer requests a change in a function, first make sure that the function can be customized.

·

Be sure to make a note of the current settings before customizing.

·

When troubleshooting a function, first make sure that the function is set to the default setting.



HINT:

The following items can be customized.


i.

Connect the intelligent tester.


ii.

Turn the power switch on (IG).


iii.

Turn the intelligent tester on.


iv.

Enter the following menus: Body / Air Conditioner / Utility / Customize.


v.

Select the setting by referring to the table below.

Air Conditioner
Tester Display Default Content Setting Relevant ECU
Set Temperature Shift Normal Function to perform control with the shifted temperature versus the displayed temperature -2C, -1C, Normal, +1C, +2C Air Conditioning Amplifier Assembly
Compressor Mode Automatic Function to turn the A/C ON automatically by pressing the AUTO button when the blower is ON and the A/C is OFF Automatic or Manual Air Conditioning Amplifier Assembly
Air Inlet Mode Automatic In case of turning the A/C ON to cool the cabin down quickly, this is the function to change the mode automatically to RECIRCULATION mode Automatic or Manual Air Conditioning Amplifier Assembly
Foot/DEF Auto Mode ON Function to turn the airflow from FOOT/DEF ON automatically when AUTO MODE is ON ON or OFF Air Conditioning Amplifier Assembly
Foot/DEF Automatic Blow Up Function ON Function to increase the blower level automatically when the defroster is ON ON or OFF Air Conditioning Amplifier Assembly
Ambient Temperature Shift Normal Function to display shifted ambient temperature versus actual ambient temperature -3C, -2C, -1C, Normal, +1C, +2C, +3C Air Conditioning Amplifier Assembly
ECO MODE Cancel OFF Function to cancel the ECO mode drive when item is on. OFF or ON Air Conditioning Amplifier Assembly
Noise and Vibration Reduction OFF Function to change speed of the compressor when item is on. OFF or ON Air Conditioning Amplifier Assembly
Refrigerant Shortage Check ON Function to cancel the refrigerant shortage check (check performed during normal operation) when item is OFF. ON or OFF Air Conditioning Amplifier Assembly
Fan speed increment control Normal Function to define how fast the AC blower goes to target speed when first activating the AC. Slow, Normal, Fast Air Conditioning Amplifier Assembly
Outside Air Mode Auto Switch Function ON Function to automatically change the air inlet to FRESH mode when the vehicle is parked ON or OFF Air Conditioning Amplifier Assembly