Home › Vehicle Interior › HEATING / AIR CONDITIONING › CONDENSER
RM2170E _58 Vehicle Interior _057042 HEATING / AIR CONDITIONING _0278133 CONDENSER A

HEATING / AIR CONDITIONING  CONDENSER  REASSEMBLY  


PROCEDURE

Hide 1.INSTALL COOLER DRYER

a.
E331197E01
0.848,1.352 1.085,1.580 0.237,0.228 10 *a 1.427,1.464 1.066,1.464 false

Using pliers, install a new cooler dryer to the modulator.

Text in Illustration
*a Modulator


b.

for Type A:

i.
E253686

Apply sufficient compressor oil to the 3 O-rings and the fitting surfaces of a new cap.

Compressor Oil:

ND-OIL 11 or equivalent




c.

for Type B:

i.
E101932

Apply sufficient compressor oil to the O-ring and the fitting surface of a new cap.

Compressor Oil:

ND-OIL 11 or equivalent




d.
E331198

Using a 14 mm straight hexagon socket wrench, install the cap to the modulator.

Torque:
for Type A : 4.0 N*m (41 kgf*cm, 35 in.*lbf)
for Type B : 2.9 N*m (30 kgf*cm, 26 in.*lbf)