55405B
1.REMOVE CENTER INSTRUMENT CLUSTER FINISH PANEL SUB-ASSEMBLY
55660
2.REMOVE NO. 2 INSTRUMENT PANEL REGISTER ASSEMBLY (for LHD)
55650
3.REMOVE NO. 1 INSTRUMENT PANEL REGISTER ASSEMBLY (for RHD)
55474B
4.REMOVE INSTRUMENT CLUSTER FINISH PANEL GARNISH
55479D
5.REMOVE LOWER INSTRUMENT CLUSTER FINISH PANEL GARNISH
55900
6.REMOVE AIR CONDITIONING CONTROL ASSEMBLY
88625Q
7.REMOVE ROOM TEMPERATURE SENSOR (COOLER THERMISTOR)
Insert a screwdriver into the position shown in the illustration to disengage the 2 claws.
Disconnect the connector and aspirator and remove the room temperature sensor (cooler thermistor).