88719A
1.INSTALL AIR CONDITIONER PRESSURE SENSOR
Remove the attached vinyl tape from the liquid tube sub-assembly and the connecting part of the cooler condenser.
Apply sufficient compressor oil to a new air conditioner pressure sensor and the connecting surface.
ND-OIL 11 or equivalent.
Using a deep socket wrench 27 mm, install the air conditioner pressure sensor.
| *a | Turn |
| *b | Hold |
Connect the connector.
2.CHARGE AIR CONDITIONING SYSTEM WITH REFRIGERANT
3.WARM UP COMPRESSOR
4.INSPECT FOR REFRIGERANT LEAK