55054
1.REMOVE GLOVE COMPARTMENT DOOR STOPPER SUB-ASSEMBLY
Disengage the claw and remove the glove compartment door stopper sub-assembly.
85530
2.REMOVE NO. 1 POWER OUTLET SOCKET ASSEMBLY
85535B
3.REMOVE NO. 1 POWER OUTLET SOCKET COVER
89611
4.REMOVE POWER SWITCH (for LHD)
55539
5.REMOVE SPARE SWITCH HOLE COVER (for RHD)
Disengage the 2 claws and remove the spare switch hole cover.
55468C
6.REMOVE NO. 1 INSTRUMENT CLUSTER FINISH PANEL SEAL
Using a clip remover, remove the clip.
Disengage the 2 claws as shown in the illustration.
Disengage the 3 claws and guide and remove the No. 1 instrument cluster finish panel seal.