55468C
1.INSTALL NO. 1 INSTRUMENT CLUSTER FINISH PANEL SEAL
Engage the 3 claws and guide.
Engage the 2 claws as shown in the illustration.
Install the No. 1 instrument cluster finish panel seal with the clip.
55539
2.INSTALL SPARE SWITCH HOLE COVER (for RHD)
Engage the 2 claws to install the spare switch hole cover.
89611
3.INSTALL POWER SWITCH (for LHD)
85535B
4.INSTALL NO. 1 POWER OUTLET SOCKET COVER
85530
5.INSTALL NO. 1 POWER OUTLET SOCKET ASSEMBLY
55054
6.INSTALL GLOVE COMPARTMENT DOOR STOPPER SUB-ASSEMBLY
Engage the claw to install the glove compartment door stopper sub-assembly.