55650
1.REMOVE NO. 1 INSTRUMENT PANEL REGISTER ASSEMBLY (for LHD)
Disengage the 3 clips and remove the No. 1 instrument panel register assembly.
55660
2.REMOVE NO. 2 INSTRUMENT PANEL REGISTER ASSEMBLY (for RHD)
Disengage the 3 clips and remove the No. 2 instrument panel register assembly.
55961
3.REMOVE NO. 1 SIDE DEFROSTER NOZZLE
Using a moulding remover, disengage the 4 claws and remove the No. 1 side defroster nozzle.
55962
4.REMOVE NO. 2 SIDE DEFROSTER NOZZLE
Using a moulding remover, disengage the 4 claws and remove the No. 2 side defroster nozzle.
5.REMOVE NO. 1 HEATER TO REGISTER DUCT ASSEMBLY
Remove the 3 screws <B> and No. 1 heater to register duct assembly.
6.REMOVE NO. 2 HEATER TO REGISTER DUCT ASSEMBLY
Remove the 3 screws <B> and No. 2 heater to register duct assembly.
55971C
7.REMOVE NO. 1 SIDE DEFROSTER NOZZLE DUCT
Remove the 3 screws <B> and No. 1 side defroster nozzle duct from the No. 1 heater to register duct.
55972C
8.REMOVE NO. 2 SIDE DEFROSTER NOZZLE DUCT
Remove the 3 screws <B> and No. 2 side defroster nozzle duct from the No. 2 heater to register duct.
73960A
9.REMOVE INSTRUMENT PANEL PASSENGER AIRBAG ASSEMBLY
55381A
10.REMOVE FINISH PANEL MOUNTING BRACKET
Remove the 2 screws <B> and finish panel mounting bracket.
Use the same procedure for the RH and LH sides.
55355
11.REMOVE NO. 1 INSTRUMENT PANEL CUSHION
Remove the 4 No. 1 instrument panel cushions.
55356C
12.REMOVE NO. 2 INSTRUMENT PANEL CUSHION
Remove the No. 2 instrument panel cushion.
55349A
13.REMOVE INSTRUMENT PANEL CUSHION
Remove the instrument panel cushion.
Remove the instrument panel cushion.
55359D
14.REMOVE NO. 5 INSTRUMENT PANEL CUSHION
Remove the No. 5 instrument panel cushion.