Home › Vehicle Exterior › WINDOW / GLASS › POWER WINDOW CONTROL SYSTEM › 2011.12–2017.06
RM2170E _59 Vehicle Exterior _057045 WINDOW / GLASS _0278147 POWER WINDOW CONTROL SYSTEM J

WINDOW / GLASS  POWER WINDOW CONTROL SYSTEM  Power Windows do not Operate Using All Window Switch  


DESCRIPTION

The power windows operate by using the power window regulator master switch assembly or power window regulator switch assemblies.

The power window regulator master switch assembly and each power window regulator switch assembly connect the same power supply and ground lines.

WIRING DIAGRAM

B301265E06
0.961,4.958 2.627,5.127 1.666,0.170 10 : LIN Communication Line 2.024,4.157 4.082,4.486 2.059,0.330 10 Power Window Regulator Motor Assembly (for Driver Door) 2.024,3.999 3.112,4.159 1.088,0.159 10 J3*1, H3*2 4.583,4.449 6.211,4.779 1.628,0.330 10 Power Window Regulator Master Switch Assembly 4.583,4.283 5.348,4.435 0.765,0.152 10 J1*1, H1*2 3.299,0.818 5.122,1.140 1.823,0.323 10 Main Body ECU (Multiplex Network Body ECU) 3.299,0.636 3.619,0.801 0.320,0.165 10 G59 4.402,2.368 4.530,2.529 0.128,0.161 10 U 3.356,2.265 3.583,2.426 0.228,0.161 10 UP 3.285,2.55 3.580,2.711 0.295,0.161 10 LED 3.155,2.849 3.579,3.010 0.424,0.161 10 AUTO 3.127,3.134 3.603,3.295 0.477,0.161 10 DOWN 3.856,2.27 4.344,2.431 0.487,0.161 10 8*1,1*2 3.603,2.251 3.782,2.412 0.179,0.161 10 10 4.238,2.55 4.366,2.711 0.128,0.161 10 3 3.654,2.532 3.783,2.692 0.128,0.161 10 5 3.654,2.849 3.783,3.010 0.128,0.161 10 4 3.654,3.153 3.783,3.313 0.128,0.161 10 7 4.238,2.863 4.366,3.024 0.128,0.161 10 4 4.238,3.153 4.366,3.313 0.128,0.161 10 5 4.402,2.952 4.822,3.113 0.420,0.161 10 AUTO 4.402,3.251 4.530,3.411 0.128,0.161 10 D 4.402,2.644 4.812,2.804 0.410,0.161 10 LED+ 0.988,1.43 1.471,1.590 0.483,0.161 10 KOFF 1.02,1.659 1.202,1.819 0.183,0.161 10 2 2.683,1.43 3.068,1.590 0.385,0.161 10 LIN2 2.913,2.009 3.180,2.169 0.267,0.161 10 LIN 2.924,1.828 3.103,1.988 0.179,0.161 10 9 0.877,5.324 1.710,5.494 0.833,0.170 10 *1: for LHD 2.026,5.324 2.838,5.494 0.812,0.170 10 *2: for RHD

B307916E07
0.26,3.758 2.283,4.251 2.023,0.493 10 Power Window Regulator Motor Assembly (for Front Passenger Door) 0.569,1.959 3.343,2.137 2.774,0.178 10 Instrument Panel Junction Block Assembly 2.445,3.912 4.181,4.405 1.736,0.493 10 Power Window Regulator Switch Assembly (for Front Passenger Door) 0.27,5.948 2.266,6.338 1.996,0.389 10 Power Window Regulator Motor Assembly (for Rear LH Door) 2.376,5.949 4.421,6.295 2.045,0.347 10 Power Window Regulator Switch Assembly (for Rear LH Door) 0.186,8.157 2.182,8.495 1.996,0.338 10 Power Window Regulator Motor Assembly (for Rear RH Door) 2.311,8.157 4.355,8.504 2.045,0.347 10 Power Window Regulator Switch Assembly (for Rear RH Door) 4.63,8.5 6.220,8.846 1.590,0.347 10 Power Window Regulator Master Switch Assembly 2.17,1.572 2.618,1.726 0.448,0.155 10 P/W 3.548,1.305 4.519,1.673 0.971,0.368 10 from Auxiliary Battery 1.915,2.835 2.485,2.989 0.570,0.155 10 DOOR P 1.831,5.02 2.570,5.175 0.739,0.155 10 DOOR R/L 1.831,7.22 2.614,7.375 0.783,0.155 10 DOOR R/R 0.43,9.318 1.219,9.473 0.790,0.155 10 *1: for LHD 1.55,9.318 2.340,9.473 0.790,0.155 10 *2: for RHD 2.055,2.456 2.371,2.611 0.316,0.155 10 P/W 0.26,3.59 0.637,3.745 0.376,0.155 10 J4*2 0.26,3.406 0.639,3.561 0.379,0.155 10 H4*1 2.445,3.744 3.141,3.899 0.696,0.155 10 H2*1,J2*2 0.27,5.78 0.599,5.935 0.330,0.155 10 L2 2.376,5.78 2.682,5.935 0.306,0.155 10 L1 0.186,7.989 0.515,8.144 0.330,0.155 10 K2 2.311,7.989 2.636,8.144 0.325,0.155 10 K1 4.63,8.331 5.289,8.486 0.658,0.155 10 J1*1,H1*2 4.263,2.238 4.393,2.393 0.131,0.155 10 6 4.49,2.238 4.600,2.393 0.110,0.155 10 B 3.75,3.065 4.417,3.219 0.667,0.155 10 16*1, 12*2 4.49,3.065 4.612,3.219 0.122,0.155 10 U 3.75,3.429 4.417,3.584 0.667,0.155 10 15*1, 13*2 3.75,5.236 4.417,5.391 0.667,0.155 10 12*1, 18*2 3.75,7.436 4.417,7.591 0.667,0.155 10 10*1, 16*2 3.75,7.796 4.417,7.950 0.667,0.155 10 18*1, 15*2 3.75,5.601 4.417,5.755 0.667,0.155 10 13*1, 10*2 4.49,3.429 4.612,3.584 0.122,0.155 10 D 1.422,2.965 1.544,3.120 0.122,0.155 10 U 1.422,3.345 1.544,3.500 0.122,0.155 10 D 1.626,2.965 1.748,3.120 0.122,0.155 10 2 1.626,3.345 1.748,3.500 0.122,0.155 10 1 2.66,2.965 2.755,3.120 0.095,0.155 10 4 2.66,3.345 2.755,3.500 0.095,0.155 10 1 3.575,3.065 3.670,3.220 0.095,0.155 10 5 3.575,3.429 3.670,3.584 0.095,0.155 10 2 3.336,3.065 3.547,3.220 0.211,0.155 10 SU 3.336,3.429 3.547,3.584 0.211,0.155 10 SD 2.809,2.965 2.931,3.120 0.122,0.155 10 U 2.809,3.345 2.931,3.500 0.122,0.155 10 D 4.49,5.236 4.612,5.391 0.122,0.155 10 U 4.49,5.601 4.612,5.755 0.122,0.155 10 D 4.49,7.436 4.612,7.591 0.122,0.155 10 U 4.49,7.796 4.612,7.950 0.122,0.155 10 D 6.288,7.645 6.399,7.800 0.111,0.155 10 E 6.482,7.645 7.002,7.800 0.519,0.155 10 1*1, 9*2 3.253,2.741 3.375,2.895 0.122,0.155 10 3 3.253,2.921 3.375,3.076 0.122,0.155 10 B 1.42,5.14 1.542,5.295 0.122,0.155 10 U 1.42,5.52 1.542,5.675 0.122,0.155 10 D 1.624,5.14 1.746,5.295 0.122,0.155 10 1 1.624,5.52 1.746,5.675 0.122,0.155 10 2 2.657,5.14 2.753,5.295 0.095,0.155 10 4 2.657,5.52 2.753,5.675 0.095,0.155 10 1 3.573,5.24 3.668,5.395 0.095,0.155 10 5 3.573,5.604 3.668,5.759 0.095,0.155 10 2 3.333,5.24 3.544,5.395 0.211,0.155 10 SU 3.333,5.604 3.544,5.759 0.211,0.155 10 SD 2.807,5.14 2.929,5.295 0.122,0.155 10 U 2.807,5.52 2.929,5.675 0.122,0.155 10 D 3.25,4.916 3.372,5.071 0.122,0.155 10 3 3.25,5.096 3.372,5.251 0.122,0.155 10 B 1.42,7.34 1.542,7.494 0.122,0.155 10 U 1.42,7.72 1.542,7.874 0.122,0.155 10 D 1.624,7.34 1.746,7.494 0.122,0.155 10 1 1.624,7.72 1.746,7.874 0.122,0.155 10 2 2.657,7.34 2.753,7.494 0.095,0.155 10 4 2.657,7.72 2.753,7.874 0.095,0.155 10 1 3.573,7.44 3.668,7.595 0.095,0.155 10 5 3.573,7.804 3.668,7.958 0.095,0.155 10 2 3.333,7.44 3.544,7.595 0.211,0.155 10 SU 3.333,7.804 3.544,7.958 0.211,0.155 10 SD 2.807,7.34 2.929,7.494 0.122,0.155 10 U 2.807,7.72 2.929,7.874 0.122,0.155 10 D 3.25,7.115 3.372,7.270 0.122,0.155 10 3 3.25,7.296 3.372,7.451 0.122,0.155 10 B

CAUTION / NOTICE / HINT

NOTICE:

Inspect the fuses for circuits related to this system before performing the following inspection procedure.


PROCEDURE

1.CHECK HARNESS AND CONNECTOR (POWER WINDOW MASTER SWITCH ASSEMBLY - AUXILIARY BATTERY AND BODY GROUND)
a.

Disconnect the power window regulator master switch assembly connector.


b.

Measure the voltage and resistance according to the value(s) in the table below.

Standard Voltage:
for LHD
Tester Connection Condition Specified Condition
J1-6 (B) - Body ground Power switch on (IG) 11 to 14 V

for RHD
Tester Connection Condition Specified Condition
H1-6 (B) - Body ground Power switch on (IG) 11 to 14 V


Standard Resistance:
for LHD
Tester Connection Condition Specified Condition
J1-1 (E) - Body ground Always Below 1 Ω

for RHD
Tester Connection Condition Specified Condition
H1-9 (E) - Body ground Always Below 1 Ω




OK

2.REPLACE POWER WINDOW REGULATOR MASTER SWITCH ASSEMBLY

NG

REPAIR OR REPLACE HARNESS OR CONNECTOR

2.REPLACE POWER WINDOW REGULATOR MASTER SWITCH ASSEMBLY
a.

Replace the power window regulator master switch assembly (See page Vehicle Exterior>WINDOW / GLASS>POWER WINDOW MASTER SWITCH>REMOVAL).



NEXT

3.CHECK POWER WINDOW CONTROL SYSTEM
3.CHECK POWER WINDOW CONTROL SYSTEM
a.

Check the power windows operation by using the power window regulator master switch assembly and power window regulator switch assemblies.

OK:

All power windows operate normally.




OK

END (POWER WINDOW REGULATOR MASTER SWITCH ASSEMBLY WAS DEFECTIVE)

NG

REPLACE MAIN BODY ECU (MULTIPLEX NETWORK BODY ECU)