1.REMOVE FRONT BUMPER ASSEMBLY
85341A
2.REMOVE HEADLIGHT CLEANER WASHER NOZZLE COVER
85208A
3.REMOVE HEADLIGHT WASHER ACTUATOR SUB-ASSEMBLY LH
Push the tabs shown by arrows (a) and (b) and disconnect the headlight cleaner hose.
Remove the headlight cleaner clamp as shown in the illustration.
Pull down the headlight cleaner actuator clamp as shown in the illustration.
| *1 | Headlight Cleaner Actuator Clamp |
While pushing the tab shown by arrow (a), disengage the claw and guide to remove the headlight washer actuator sub-assembly LH as shown in the illustration.
85207A
4.REMOVE HEADLIGHT WASHER ACTUATOR SUB-ASSEMBLY RH
Use the same procedure for the RH side and LH side.