Use the same procedure for the RH and LH sides.
The procedure described below is for the LH side.
1.REMOVE FRONT BUMPER ASSEMBLY
81520
2.REMOVE FRONT TURN SIGNAL LIGHT ASSEMBLY
Remove the bolt.
Disengage the 2 claws and remove the front turn signal light assembly.
81510B
3.REMOVE FRONT TURN SIGNAL LIGHT BULB
Turn the front turn signal light plug assembly with the front turn signal light bulb in the direction indicated by the arrow shown in the illustration, and remove them as a unit.
Remove the front turn signal light bulb from the front turn signal light plug assembly.