Use the same procedure for the RH and LH sides.
The procedure described below is for the LH side.
68210C
1.REMOVE FRONT DOOR GLASS OUTER WEATHERSTRIP ASSEMBLY
68151D
2.REMOVE FRONT DOOR GLASS RUN
75922M
3.REMOVE NO. 1 BLACK OUT TAPE
Using a heat light, heat the No. 1 black out tape and vehicle body.
| Item | Temperature |
|---|---|
| No. 1 Black Out Tape and Vehicle Body | 40 to 60°C (104 to 140°F) |
Do not heat the vehicle body excessively.
Pull back on one of the ends of the No. 1 black out tape to remove it.
When pulling on the stripe, pull it parallel to the body.