CHECK INSTRUMENT PANEL JUNCTION BLOCK ASSEMBLY AND MAIN BODY ECU (MULTIPLEX NETWORK BODY ECU)
| *A | Main Body ECU (Multiplex Network Body ECU) with 1 Connector | *B | for LHD |
| *C | for RHD | - | - |
| *1 | Main Body ECU (Multiplex Network Body ECU) | - | - |
| *A | Main Body ECU (Multiplex Network Body ECU) with 2 Connectors | *B | for LHD |
| *C | for RHD | - | - |
| *1 | Main Body ECU (Multiplex Network Body ECU) | - | - |
Remove the main body ECU (multiplex network body ECU) from the instrument panel junction block assembly.
Click herePower Source / Network>POWER DISTRIBUTION>MAIN BODY ECU>REMOVAL
Reconnect the instrument panel junction block assembly connectors.
Measure the voltage and resistance according to the value(s) in the table below.
| Terminal No. (Symbol) | Wiring Color | Terminal Description | Condition | Specified Condition |
|---|---|---|---|---|
| MB-11 (GND1) - Body ground | - | Ground | Always | Below 1 Ω |
| MB-30 (BECU) - Body ground | - | Auxiliary battery power supply | Power switch off | 11 to 14 V |
| MB-29 (ACC) - Body ground | - | ACC power supply | Power switch on (ACC) | 11 to 14 V |
| MB-29 (ACC) - Body ground | - | ACC power supply | Power switch off | Below 1 V |
| MB-32 (IG) - Body ground | - | Power switch power supply | Power switch on (IG) | 11 to 14 V |
| MB-32 (IG) - Body ground | - | Power switch power supply | Power switch off | Below 1 V |
Install the main body ECU (multiplex network body ECU) to the instrument panel junction block assembly.
Click herePower Source / Network>POWER DISTRIBUTION>MAIN BODY ECU>INSTALLATION
Measure the voltage and check for pulses according to the value(s) in the table below.
| Terminal No. (Symbol) | Wiring Color | Terminal Description | Condition | Specified Condition |
|---|---|---|---|---|
| 3B-3 (ACT-) - Body ground | R - Body ground | Door lock motor unlock drive output (all doors) | Door control switch (power window regulator master switch assembly) or driver door key cylinder off | Below 1 V |
| 3B-3 (ACT-) - Body ground | R - Body ground | Door lock motor unlock drive output (all doors) | Door control switch (power window regulator master switch assembly) or driver door key cylinder unlocked | 11 to 14 V |
| 3D-8 (ACT-) - Body ground | P - Body ground | Door lock motor unlock drive output (all doors) | Door control switch (power window regulator master switch assembly) or driver door key cylinder off | Below 1 V |
| 3D-8 (ACT-) - Body ground | P - Body ground | Door lock motor unlock drive output (all doors) | Door control switch (power window regulator master switch assembly) or driver door key cylinder unlocked | 11 to 14 V |
| 3D-7 (ACT-) - Body ground | LG - Body ground | Door lock motor unlock drive output (all doors) | Door control switch (power window regulator master switch assembly) or driver door key cylinder off | Below 1 V |
| 3D-7 (ACT-) - Body ground | LG - Body ground | Door lock motor unlock drive output (all doors) | Door control switch (power window regulator master switch assembly) or driver door key cylinder unlocked | 11 to 14 V |
| 3B-4 (ACT-) - Body ground*1 | L - Body ground | Door lock motor unlock drive output (all doors) | Door control switch (power window regulator master switch assembly) or driver door key cylinder off | Below 1 V |
| 3B-4 (ACT-) - Body ground*1 | L - Body ground | Door lock motor unlock drive output (all doors) | Door control switch (power window regulator master switch assembly) or driver door key cylinder unlocked | 11 to 14 V |
| 3B-1 (ACT+) - Body ground | Y - Body ground | Door lock motor lock drive output (all doors) | Door control switch (power window regulator master switch assembly) or driver door key cylinder off | Below 1 V |
| 3B-1 (ACT+) - Body ground | Y - Body ground | Door lock motor lock drive output (all doors) | Door control switch (power window regulator master switch assembly) or driver door key cylinder locked | 11 to 14 V |
| 3B-2 (ACT+) - Body ground | V - Body ground | Door lock motor lock drive output (all doors) | Door control switch (power window regulator master switch assembly) or driver door key cylinder off | Below 1 V |
| 3B-2 (ACT+) - Body ground | V - Body ground | Door lock motor lock drive output (all doors) | Door control switch (power window regulator master switch assembly) or driver door key cylinder locked | 11 to 14 V |
| 3D-12 (ACT+) - Body ground | L - Body ground | Door lock motor lock drive output (all doors) | Door control switch (power window regulator master switch assembly) or driver door key cylinder off | Below 1 V |
| 3D-12 (ACT+) - Body ground | L - Body ground | Door lock motor lock drive output (all doors) | Door control switch (power window regulator master switch assembly) or driver door key cylinder locked | 11 to 14 V |
| 3D-11 (ACT+) - Body ground | GR - Body ground | Door lock motor lock drive output (all doors) | Door control switch (power window regulator master switch assembly) or driver door key cylinder off | Below 1 V |
| 3D-11 (ACT+) - Body ground | GR - Body ground | Door lock motor lock drive output (all doors) | Door control switch (power window regulator master switch assembly) or driver door key cylinder locked | 11 to 14 V |
| 3B-4 (ACTD) - Body ground*2 | L - Body ground | D door lock motor unlock drive output (driver door) | Door control switch (power window regulator master switch assembly) or driver door key cylinder off | Below 1 V |
| 3B-4 (ACTD) - Body ground*2 | L - Body ground | D door lock motor unlock drive output (driver door) | Door control switch (power window regulator master switch assembly) or driver door key cylinder unlocked | 11 to 14 V |
| G59-19 (FRCY) - Body ground | R - Body ground | Front door courtesy light switch RH input | Front door RH open | Below 1 V |
| G59-19 (FRCY) - Body ground | R - Body ground | Front door courtesy light switch RH input | Front door RH closed | Pulse generation |
| 3D-36 (FLCY) - Body ground | R - Body ground | Front door courtesy light switch LH input | Front door LH open | Below 1 V |
| 3D-36 (FLCY) - Body ground | R - Body ground | Front door courtesy light switch LH input | Front door LH closed | Pulse generation |
| G59-24 (LCTY) - Body ground*1 | L - Body ground | Rear door courtesy light switch LH input | Rear door LH open | Below 1 V |
| G59-24 (LCTY) - Body ground*1 | L - Body ground | Rear door courtesy light switch LH input | Rear door LH closed | Pulse generation |
| G59-1 (LCTY) - Body ground*2 | L - Body ground | Rear door courtesy light switch LH input | Rear door LH open | Below 1 V |
| G59-1 (LCTY) - Body ground*2 | L - Body ground | Rear door courtesy light switch LH input | Rear door LH closed | Pulse generation |
| G59-6 (RCTY) - Body ground | G - Body ground | Rear door courtesy light switch RH input | Rear door RH open | Below 1 V |
| G59-6 (RCTY) - Body ground | G - Body ground | Rear door courtesy light switch RH input | Rear door RH closed | Pulse generation |
| G59-9 (L1) - Body ground | V*1 - Body ground
L*2 - Body ground |
Door control switch input | Door control switch locked | Below 1 V |
| G59-9 (L1) - Body ground | V*1 - Body ground
L*2 - Body ground |
Door control switch input | Door control switch off | Pulse generation |
| G59-10 (UL1) - Body ground | BE*1 - Body ground
W*2 - Body ground |
Door control switch input | Door control switch unlocked | Below 1 V |
| G59-10 (UL1) - Body ground | BE*1 - Body ground
W*2 - Body ground |
Door control switch input | Door control switch off | Pulse generation |
| G59-11 (L2) - Body ground | SB*3 - Body ground
B*4 - Body ground |
Driver door key-linked lock input | Driver door key cylinder turned to lock | Below 1 V |
| G59-11 (L2) - Body ground | SB*3 - Body ground
B*4 - Body ground |
Driver door key-linked lock input | Driver door key cylinder off | Pulse generation |
| G59-12 (UL2) - Body ground*1 | LG*3 - Body ground
G*4 - Body ground |
Driver door key-linked unlock input | Driver door key cylinder turned to unlock | Below 1 V |
| G59-12 (UL2) - Body ground*1 | LG*3 - Body ground
G*4 - Body ground |
Driver door key-linked unlock input | Driver door key cylinder off | Pulse generation |
| G59-24 (UL3) - Body ground*2 | G - Body ground | Driver door key-linked unlock input | Driver door key cylinder turned to unlock | Below 1 V |
| G59-24 (UL3) - Body ground*2 | G - Body ground | Driver door key-linked unlock input | Driver door key cylinder off | Pulse generation |
| G59-7 (LSFL) - Body ground | L - Body ground | Front door LH unlock detection switch input | Front door LH unlocked | Below 1 V |
| G59-7 (LSFL) - Body ground | L - Body ground | Front door LH unlock detection switch input | Front door LH locked | Pulse generation |
| G59-18 (LSFR) - Body ground | L - Body ground | Front door RH unlock detection switch input | Front door RH unlocked | Below 1 V |
| G59-18 (LSFR) - Body ground | L - Body ground | Front door RH unlock detection switch input | Front door RH locked | Pulse generation |
| 3D-25 (LSR) - Body ground | V - Body ground | Rear door RH unlock detection switch input | Rear door RH or LH unlocked | Below 1 V |
| 3D-25 (LSR) - Body ground | V - Body ground | Rear door RH unlock detection switch input | Rear door RH and LH locked | Pulse generation |
| 3D-24 (LSR) - Body ground | Y - Body ground | Rear door LH unlock detection switch input | Rear door LH or RH unlocked | Below 1 V |
| 3D-24 (LSR) - Body ground | Y - Body ground | Rear door LH unlock detection switch input | Rear door LH and RH locked | Pulse generation |
| 3D-35 (BCTY) - Body ground | B - Body ground | Back door courtesy light switch input | Back door open | Below 1 V |
| 3D-35 (BCTY) - Body ground | B - Body ground | Back door courtesy light switch input | Back door closed | 11 to 14 V |
| 3D-9 (TR+) - Body ground | Y - Body ground | Back door lock motor unlock drive output | Back door opener switch (open switch) pushed | 11 to 14 V |
| 3D-9 (TR+) - Body ground | Y - Body ground | Back door lock motor unlock drive output | Back door opener switch (open switch) not pushed | Below 1 V |
*1: w/o Canister Pump Module
*2: w/ Canister Pump Module
*3: for LHD
*4: for RHD
CHECK CERTIFICATION ECU (SMART KEY ECU ASSEMBLY)
Disconnect the G78 certification ECU (smart key ECU assembly) connector.
Measure the resistance according to the value(s) in the table below.
| Terminal No. (Symbol) | Wiring Color | Terminal Description | Condition | Specified Condition |
|---|---|---|---|---|
| G78-27 (TSW5) - Body ground | L - Body ground | Back door opener switch signal | Back door opener switch on | Below 1 Ω |
| G78-27 (TSW5) - Body ground | L - Body ground | Back door opener switch signal | Back door opener switch off | 10 kΩ or higher |
Reconnect the G78 certification ECU (smart key ECU assembly) connector.
Measure the voltage according to the value(s) in the table below.
| Terminal No. (Symbol) | Wiring Color | Terminal Description | Condition | Specified Condition |
|---|---|---|---|---|
| G78-27 (TSW5) - Body ground | L - Body ground | Back door opener switch signal | Back door opener switch off | Pulse generation |
| G78-27 (TSW5) - Body ground | L - Body ground | Back door opener switch signal | Back door opener switch on | Below 1 V |