55405B
1.REMOVE CENTER INSTRUMENT CLUSTER FINISH PANEL SUB-ASSEMBLY
2.REMOVE RADIO RECEIVER ASSEMBLY WITH BRACKET
Remove the 4 screws.
Disengage the 2 guides and pull the radio receiver assembly with bracket toward the rear of the vehicle.
Disconnect each connector and remove the radio receiver assembly with bracket.
86211
3.REMOVE NO. 1 RADIO BRACKET
Remove the 3 screws and No. 1 radio bracket.
86212
4.REMOVE NO. 2 RADIO BRACKET
Remove the 3 screws and No. 2 radio bracket.
86120
5.REMOVE RADIO RECEIVER ASSEMBLY