83320
1.REMOVE FUEL SENDER GAUGE ASSEMBLY
23221
2.REMOVE FUEL PUMP
for Type A:
Disconnect the 2 fuel pump harness connectors.
Disengage the 3 clamps and remove the fuel pump harness from the fuel suction plate sub-assembly.
for Type B:
Disengage the 2 clamps.
Disconnect the 2 fuel pump harness connectors to remove the fuel pump harness from the fuel suction plate sub-assembly.
| *1 | Fuel Suction Plate Sub-assembly |
| *a | Claw |
|
Pull |
|
Slide |
Disengage the claw and slide the fuel suction plate sub-assembly and then separate it from the fuel sub-tank sub-assembly.
Disengage the 4 claws, and remove the fuel suction plate sub-assembly from the fuel sub-tank sub-assembly.
Disengage the 3 claws, and remove the fuel pump from the fuel suction plate sub-assembly.
| *1 | O-ring |
| *2 | Fuel Pump Spacer |
Remove the O-ring and fuel pump spacer from the fuel pump.
Be careful not to damage the sealing surface.