83320
1.INSTALL FUEL SENDER GAUGE ASSEMBLY
| *a | Resistance Plate and Contacts |
|
Slide |
Slide the fuel sender gauge assembly downward and engage the claw (A) to install the fuel sender gauge assembly.
Do not touch the resistance plate and contacts of the fuel sender gauge assembly.
Be careful not to bend the arm of the fuel sender gauge assembly.
for Type A:
Engage the 5 clamps.
Connect the fuel sender gauge assembly connector.
for Type B:
Connect the fuel sender gauge assembly connector.
Engage the 4 clamps.
77020A
2.INSTALL FUEL SUCTION TUBE WITH PUMP AND GAUGE ASSEMBLY