Home › Vehicle Interior › SEAT BELT › FRONT SEAT INNER BELT ASSEMBLY › from 2017.06
RM2170E _58 Vehicle Interior _057041 SEAT BELT _0278117 FRONT SEAT INNER BELT ASSEMBLY A

SEAT BELT  FRONT SEAT INNER BELT ASSEMBLY  INSTALLATION  


PROCEDURE

Hide 1.INSTALL FRONT SEAT BELT ANCHOR PLATE

a.

Install the front seat belt anchor plate.


Hide 73240 2.INSTALL FRONT SEAT INNER BELT ASSEMBLY (for Driver Side)

a.
B309595C02
0,0 0,0 false
V100155

Protruding Part


Install the front seat inner belt assembly with the nut.

Torque:
42 N*m (428 kgf*cm, 31 ft.*lbf)

NOTICE:

Do not allow the anchor part of the front seat inner belt assembly to overlap the protruding part of the front seat adjuster.



b.

Engage the 2 clamps.


c.

Engage each clamp under the front seat assembly.


Hide 73230 3.INSTALL FRONT SEAT INNER BELT ASSEMBLY (for Front Passenger Side)

a.

w/o Occupant Detection Sensor:

i.
B483200C02
0,0 0,0 false
V100155

Protruding Part


Install the front seat inner belt assembly with the nut as shown in the illustration.

Torque:
42 N*m (428 kgf*cm, 31 ft.*lbf)

NOTICE:

Do not allow the anchor part of the front seat inner belt assembly to overlap the protruding part of the front seat adjuster.




b.
B309596C01
0,0 0,0 false
V100155

Protruding Part


w/ Occupant Detection Sensor:

i.

Install the front seat inner belt assembly with the nut.

Torque:
42 N*m (428 kgf*cm, 31 ft.*lbf)

NOTICE:

Do not allow the anchor part of the front seat inner belt assembly to overlap the protruding part of the front seat adjuster.



ii.

Engage the clamp.



c.

Engage each clamp under the front seat assembly.


d.

Engage each connector under the front seat assembly.