45130
1.REMOVE HORN BUTTON ASSEMBLY
2.REMOVE STEERING PAD SWITCH ASSEMBLY
Disconnect the steering pad switch connector from the spiral cable.
Remove the 2 screws.
Disengage the 2 claws to remove the steering pad switch assembly (RH side) from the steering wheel sub-assembly.
Remove the 2 screws.
Disengage the 2 claws to remove the steering pad switch assembly (LH side) from the steering wheel sub-assembly.
84247A
3.REMOVE STEERING PAD SWITCH LH
Remove the clamp.
Disconnect the connector to remove the steering pad switch LH from the steering pad switch RH.