Home › Engine / Hybrid System › HYBRID / BATTERY CONTROL › BATTERY BLOWER › from 2017.06
RM2170E _51 Engine / Hybrid System _057004 HYBRID / BATTERY CONTROL _0277937 BATTERY BLOWER A

HYBRID / BATTERY CONTROL  BATTERY BLOWER  REMOVAL  


CAUTION / NOTICE / HINT

HINT:

If the message "MAINTENANCE REQUIRED FOR TRACTION BATTERY COOLING PARTS SEE OWNER'S MANUAL" is displayed on the multi-information display, inspect the battery cooling blower assembly.

Click hereEngine / Hybrid System>HYBRID / BATTERY CONTROL>BATTERY BLOWER>INSPECTION


PROCEDURE

Hide 58165F 1.REMOVE FRONT FLOOR COVER RH (for Separate Type Seatback)

Hide 58166B 2.REMOVE FRONT FLOOR COVER LH (for Separate Type Seatback)

Hide 58167H 3.REMOVE FRONT CENTER FLOOR COVER (for Separate Type Seatback)

Hide 4.REMOVE REAR SEAT CUSHION ASSEMBLY (for Separate Type Seatback)

Hide G9230 5.REMOVE BATTERY COOLING BLOWER ASSEMBLY

NOTICE:
·

Be sure not to touch the fan part of the battery cooling blower assembly.

·

Do not lift the battery cooling blower assembly using the wire harness.

·

Do not disassemble the battery cooling blower assembly.



a.
A266732

Disconnect the battery cooling blower assembly connector and disengage the clamp.


b.
A266733

Remove the nut, 2 bolts and battery cooling blower assembly.