Home › Vehicle Interior › SUPPLEMENTAL RESTRAINT SYSTEMS › AIRBAG SYSTEM › from 2017.06
RM2170E _58 Vehicle Interior _057039 SUPPLEMENTAL RESTRAINT SYSTEMS _0278099 AIRBAG SYSTEM C

SUPPLEMENTAL RESTRAINT SYSTEMS  AIRBAG SYSTEM  B1610/13  Front Airbag Sensor RH Malfunction  


DESCRIPTION

The front airbag sensor RH circuit consists of the airbag sensor assembly and front airbag sensor RH.

The front airbag sensor RH detects impacts to the vehicle and sends signals to the airbag sensor assembly to determine if the airbag and pretensioner should be deployed.

DTC B1610/13 is stored when a malfunction is detected in the front airbag sensor RH.

DTC No. DTC Detection Condition Trouble Area
B1610/13
·

Front airbag sensor RH malfunction

·

Airbag sensor assembly malfunction


·

Front airbag sensor RH

·

Airbag sensor assembly



WIRING DIAGRAM

Refer to DTCs B1612/83 and B1613/83 (See page Vehicle Interior>SUPPLEMENTAL RESTRAINT SYSTEMS>AIRBAG SYSTEM>B1612/83).

CAUTION / NOTICE / HINT

NOTICE:

After turning the power switch off, waiting time may be required before disconnecting the cable from the negative (-) auxiliary battery terminal. Therefore, make sure to read the disconnecting the cable from the negative (-) auxiliary battery terminal notices before proceeding with work (See page General>INTRODUCTION>REPAIR INSTRUCTION>PRECAUTION).


PROCEDURE

1.CHECK FRONT AIRBAG SENSOR RH
a.
C279500C02
0.156,0.073 0.552,0.375 0.396,0.302 10 false *A 0.198,2.365 0.573,2.688 0.375,0.323 10 false *B 0.49,0.938 0.833,1.208 0.344,0.271 10 false *1 2.625,3.479 2.948,3.792 0.323,0.313 10 false *2 2.604,1.24 2.948,1.51 0.344,0.271 10 false *2 2.177,0.958 2.521,1.229 0.344,0.271 10 false A 2.021,0.958 2.365,1.229 0.344,0.271 10 false B 1.573,0.958 1.917,1.229 0.344,0.271 10 false C 1.417,0.958 1.76,1.229 0.344,0.271 10 false D 0.969,0.958 1.313,1.229 0.344,0.271 10 false E 0.813,0.958 1.156,1.229 0.344,0.271 10 false F 2.177,3.458 2.521,3.729 0.344,0.271 10 false A 2.021,3.458 2.365,3.729 0.344,0.271 10 false B 1.573,3.458 1.917,3.729 0.344,0.271 10 false C 1.417,3.458 1.76,3.729 0.344,0.271 10 false D 0.969,3.458 1.313,3.729 0.344,0.271 10 false E 0.823,3.458 1.167,3.729 0.344,0.271 10 false F 0.49,3.458 0.833,3.729 0.344,0.271 10 false *1
*A w/o Occupant Classification System
*B w/ Occupant Classification System
*1 Front Airbag Sensor LH
*2 Airbag Sensor Assembly


Turn the power switch off.


b.

Disconnect the cable from the negative (-) auxiliary battery terminal.

CAUTION:

Wait at least 90 seconds after disconnecting the cable from the negative (-) auxiliary battery terminal to disable the SRS system.



c.

Interchange the front airbag sensor RH with LH and connect the connectors.


d.

Connect the cable to the negative (-) auxiliary battery terminal.



f.

Turn the power switch off.


g.

Turn the power switch on (IG), and wait for at least 60 seconds.


h.

Check for DTCs (See page Vehicle Interior>SUPPLEMENTAL RESTRAINT SYSTEMS>AIRBAG SYSTEM>DTC CHECK / CLEAR).

Result:
Result Proceed to
DTCs B1610/13 and B1615/14 are not output. A
DTC B1610/13 is output. B
DTC B1615/14 is output. C


HINT:

Codes other than DTCs B1610/13 and B1615/14 may be output at this time, but they are not related to this check.



i.

Turn the power switch off.


j.

Disconnect the cable from the negative (-) auxiliary battery terminal.

CAUTION:

Wait at least 90 seconds after disconnecting the cable from the negative (-) auxiliary battery terminal to disable the SRS system.



k.

Return the front airbag sensor RH and LH to their original positions and connect the connectors.



A

B

C