The pads, spacers and roof headlining cannot be reused as they will be damaged when the pads and spacers are removed from the roof headlining assembly.
63359B
1.REMOVE ROOF HEADLINING RETAINER COVER
86730C
2.REMOVE AMPLIFIER MICROPHONE ASSEMBLY
86101J
3.REMOVE NO. 2 ANTENNA CORD SUB-ASSEMBLY
73137A
4.REMOVE UPPER SHOULDER BELT ANCHOR COVER
Disengage the 4 claws to remove the upper shoulder belt anchor cover.
Remove the seat belt anchor cover.
82171
5.REMOVE NO. 1 ROOF WIRE (w/o Coat Hook)
w/o Room Light:
|
Adhesive Tape |
Remove the adhesive tape from the roof headlining.
Remove the No. 1 roof wire from the roof headlining.
w/ Room Light:
|
Adhesive Tape |
Remove the adhesive tape from the roof headlining.
Remove the No. 1 roof wire from the roof headlining.
82171
6.REMOVE NO. 1 ROOF WIRE (w/ Coat Hook)
|
Adhesive Tape |
Remove the adhesive tape from the roof headlining.
Remove the No. 1 roof wire from the roof headlining.