Home › Vehicle Exterior › EXTERIOR PANELS / TRIM › WHEEL OPENING MOULDING(for Rear Side) › from 2018.08
RM2170E _59 Vehicle Exterior _057051 EXTERIOR PANELS / TRIM _0364199 WHEEL OPENING MOULDING(for Rear Side) A

EXTERIOR PANELS / TRIM  WHEEL OPENING MOULDING(for Rear Side)  INSTALLATION  


CAUTION / NOTICE / HINT

HINT:
·

Use the same procedure for the RH side and LH side.

·

The following procedure is for the LH side.



PROCEDURE

Hide 75606B 1.INSTALL QUARTER OUTSIDE MOULDING SUB-ASSEMBLY

a.
B481729

Engage the 4 claws and 5 clips to install the quarter outside moulding sub-assembly.


b.

Install the screw and clip.