76902
1.REMOVE SIDE MUDGUARD SUB-ASSEMBLY (w/ Wheel Opening Moulding)
2.REMOVE FRONT WHEEL RH
53851D
3.REMOVE FRONT WHEEL OPENING EXTENSION PAD RH
Remove the 2 screws and front wheel opening extension pad RH.
53875A
4.REMOVE FRONT FENDER LINER RH
w/o Wheel Opening Moulding:
Remove the 4 screws.
Remove the 5 grommets.
Remove the 7 clips and front fender liner RH.
w/ Wheel Opening Moulding:
Remove the screw.
Remove the 5 grommets.
Remove the 4 clips and front fender liner RH.
5.DRAIN WINDSHIELD WASHER FLUID
Disconnect the washer hose from the windshield washer motor and pump assembly, and drain the windshield washer fluid.
Use a container to collect the windshield washer fluid.
85310
6.REMOVE WINDSHIELD WASHER MOTOR AND PUMP ASSEMBLY
Disconnect the connector.
Remove the windshield washer motor and pump assembly as shown in the illustration.
85330A
7.REMOVE WINDSHIELD WASHER JAR BUSH
Remove the windshield washer jar bush from the windshield washer jar.