1.DRAIN COOLANT (for Engine)
11212
2.REMOVE NO. 2 CYLINDER HEAD COVER
17705
3.REMOVE AIR CLEANER CAP SUB-ASSEMBLY
Disconnect the connector.
Loosen the hose clamp and disconnect the air cleaner hose assembly.
Remove the 2 clamps and air cleaner cap sub-assembly.
17750A
4.REMOVE INLET AIR CLEANER ASSEMBLY
5.REMOVE AIR CLEANER CASE
Remove the air cleaner filter element sub-assembly.
Disconnect the water hose from the 3 clamps.
Remove the 3 bolts and air cleaner case.
6.REMOVE AIR CLEANER HOSE ASSEMBLY
Disconnect the ventilation hose from the cylinder head cover sub-assembly.
Loosen the hose clamp and remove the air cleaner hose assembly.
22210
7.REMOVE THROTTLE BODY ASSEMBLY
Type A:
Disconnect the connector.
Disconnect the No. 1 water by-pass hose and No. 2 water by-pass hose.
Remove the 2 bolts, 2 nuts and throttle body assembly.
Remove the gasket from the intake manifold.
Type B:
Disconnect the connector.
Disconnect the No. 1 water by-pass hose and No. 2 water by-pass hose.
Remove the 4 bolts and throttle body assembly.
Remove the gasket from the intake manifold.