Home › Engine / Hybrid System › 2ZR-FXE (COOLING) › THERMOSTAT
RM2070E _51 Engine / Hybrid System _061911 2ZR-FXE COOLING _0301626 THERMOSTAT A

2ZR-FXE COOLING  THERMOSTAT  INSTALLATION  


PROCEDURE

Hide 16031 1.INSTALL WATER INLET WITH THERMOSTAT SUB-ASSEMBLY

a.

Install a new gasket on the water inlet with thermostat sub-assembly.


b.

Type A:

i.

Install a new gasket to the water inlet with thermostat sub-assembly.


ii.

Install the water inlet with thermostat sub-assembly with the 2 nuts and bolt.

Torque:
10 N*m (102 kgf*cm, 7 ft.*lbf)



c.

Type B:

i.

Install a new gasket to the water inlet with thermostat sub-assembly.


ii.

Install the water inlet with thermostat sub-assembly with the 3 bolts.

Torque:
10 N*m (102 kgf*cm, 7 ft.*lbf)



d.

Connect the No. 2 radiator hose and No. 3 water by-pass hose.


Hide 11409 4.INSTALL ENGINE OIL LEVEL DIPSTICK GUIDE