Home › Engine / Hybrid System › 2ZR-FXE (COOLING) › THERMOSTAT › from 2013.08
RM2070E _51 Engine / Hybrid System _061911 2ZR-FXE COOLING _0301626 THERMOSTAT A

2ZR-FXE COOLING  THERMOSTAT  REMOVAL  


PROCEDURE

Hide 11409 2.REMOVE ENGINE OIL LEVEL DIPSTICK GUIDE

Hide 16031 4.REMOVE WATER INLET WITH THERMOSTAT SUB-ASSEMBLY

a.
A216072E01
2.279,1.792 2.491,1.957 0.211,0.165 10 *1 1.919,1.631 2.251,1.815 false 2.718,1.047 2.929,1.212 0.211,0.165 10 *2 2.48,0.652 2.766,1.007 false

Disconnect the No. 2 radiator hose and No. 3 water by-pass hose.

Text in Illustration
*1 No. 2 Radiator Hose
*2 No. 3 Water By-pass Hose

NOTICE:
·

Do not apply force to the water inlet with thermostat sub-assembly when disconnecting the No. 3 water by-pass hose.

·

Do not damage the water inlet with thermostat sub-assembly.



HINT:

When disconnecting the No. 3 water by-pass hose, pinch the hose clamp, rotate the hose and pull it straight off the pipe.



b.

Type A:

i.
A216071

Remove the 2 nuts, bolt and water inlet with thermostat sub-assembly.


ii.
A216666

Remove the gasket from the water inlet with thermostat sub-assembly.



c.

Type B:

i.
A366321

Remove the 3 bolts and water inlet with thermostat sub-assembly.


ii.
A216666

Remove the gasket from the water inlet with thermostat sub-assembly.