Home › Engine / Hybrid System › CRUISE CONTROL › MILLIMETER WAVE RADAR SENSOR › 2014.11–2017.12
RM2070E _51 Engine / Hybrid System _061914 CRUISE CONTROL _0301638 MILLIMETER WAVE RADAR SENSOR A

CRUISE CONTROL  MILLIMETER WAVE RADAR SENSOR  INSTALLATION  


PROCEDURE

Hide 88211B 1.INSTALL MILLIMETER WAVE RADAR SENSOR ASSEMBLY

a.
E306592E02
0.729,3.031 0.969,3.25 0.24,0.219 10 false 1 1.229,0.625 1.406,0.823 0.177,0.198 10 true 2 2.646,1.76 2.802,1.938 0.156,0.177 10 true 3

Engage the guide and install the millimeter wave radar sensor assembly with the 3 bolts.

Torque:
6.2 N*m (63 kgf*cm, 55 in.*lbf)

HINT:

Tighten the bolts in the order indicated in the illustration.



b.

Connect the connector.


Hide 2.INSTALL FRONT BUMPER ASSEMBLY

Hide 88211B 3.ADJUST MILLIMETER WAVE RADAR SENSOR ASSEMBLY