Home › Engine / Hybrid System › CRUISE CONTROL › DYNAMIC RADAR CRUISE CONTROL SYSTEM › 2013.08–2014.11
RM2070E _51 Engine / Hybrid System _061914 CRUISE CONTROL _0301640 DYNAMIC RADAR CRUISE CONTROL SYSTEM C

CRUISE CONTROL  DYNAMIC RADAR CRUISE CONTROL SYSTEM  P1615  Communication Error from Distance Control ECU to HV ECU  


DESCRIPTION

This DTC is stored when a communication error occurs between the driving support ECU assembly and power management control ECU.

DTC No. DTC Detection Condition Trouble Area
P1615 All of the following conditions are met
(a) Power switch on (IG)
(b) Communication error between driving support ECU assembly and power management control ECU for 0.5 seconds or more
·

Driving support ECU assembly

·

Power management control ECU



PROCEDURE

1.CHECK FOR DTCs (DYNAMIC RADAR CRUISE CONTROL SYSTEM)
a.

Connect the GTS to the DLC3.


b.

Turn the power switch on (IG).


c.

Turn the GTS on.


d.

Enter the following menus: Powertrain / Radar Cruise / Trouble Codes.


e.

Check for DTCs.

Result:
Result Proceed to
DTC is not output A
DTC is output B




A

2.CHECK WHETHER DTC OUTPUT RECURS (DTC P1615)

B

2.CHECK WHETHER DTC OUTPUT RECURS (DTC P1615)
a.

Connect the GTS to the DLC3.


b.

Turn the power switch on (IG).


c.

Turn the GTS on.



e.

Turn the power switch off.


f.

Turn the power switch on (IG).


g.

Enter the following menus: Powertrain / Hybrid Control / Trouble Codes.


h.

Check for DTCs.

Result:
Result Proceed to
DTC is not output A
DTC P1615 is output B




A

B

3.REPLACE DRIVING SUPPORT ECU ASSEMBLY
3.REPLACE DRIVING SUPPORT ECU ASSEMBLY
a.

Replace the driving support ECU assembly (See page Engine / Hybrid System>CRUISE CONTROL>DRIVING SUPPORT ECU>REMOVAL).



NEXT

4.CHECK FOR DTCs (DTC P1615)
4.CHECK FOR DTCs (DTC P1615)
a.

Connect the GTS to the DLC3.


b.

Turn the power switch on (IG).


c.

Turn the GTS on.



e.

Turn the power switch off.


f.

Turn the power switch on (IG).


g.

Enter the following menus: Powertrain / Hybrid Control / Trouble Codes.


h.

Check for DTCs.

Result:
Result Proceed to
DTC is not output A
DTC P1615 is output B




A

END

B