89530C
1.INSTALL TRANSMISSION CONTROL ECU ASSEMBLY
Engage the 2 claws to install the transmission control ECU assembly to the ECU integration box.
82877
2.INSTALL ECU INTEGRATION BOX RH (for LHD)
82878
3.INSTALL ECU INTEGRATION BOX LH (for RHD)
55550
4.INSTALL GLOVE COMPARTMENT DOOR ASSEMBLY
55607
5.INSTALL NO. 2 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY
6.CONNECT CABLE TO NEGATIVE AUXILIARY BATTERY TERMINAL
When disconnecting the cable, some systems need to be initialized after the cable is reconnected (See page General>INTRODUCTION>REPAIR INSTRUCTION>INITIALIZATION).
64995
7.INSTALL DECK FLOOR BOX RH
64993
8.INSTALL REAR DECK FLOOR BOX
58412A
9.INSTALL NO. 2 DECK BOARD
58411A
10.INSTALL NO. 1 DECK BOARD
58410B
11.INSTALL DECK BOARD ASSEMBLY