Home › Drivetrain › AXLE AND DIFFERENTIAL › STEERING KNUCKLE
RM2070E _52 Drivetrain _061917 AXLE AND DIFFERENTIAL _0301661 STEERING KNUCKLE A

AXLE AND DIFFERENTIAL  STEERING KNUCKLE  INSTALLATION  


CAUTION / NOTICE / HINT

HINT:
·

Use the same procedure for the RH side and LH side.

·

The procedure listed below is for the LH side.



PROCEDURE

Hide 43212 1.INSTALL STEERING KNUCKLE

a.

Secure the steering knuckle between aluminum plates in a vise.

NOTICE:

Do not overtighten the vise.



b.

Install the front axle hub sub-assembly and front disc brake dust cover to the steering knuckle with the 4 bolts.

Torque:
96 N*m (979 kgf*cm, 71 ft.*lbf)


Hide 43340A 2.INSTALL FRONT LOWER BALL JOINT ASSEMBLY

Hide 3.INSTALL FRONT AXLE ASSEMBLY