47210L
1.REMOVE BRAKE BOOSTER WITH MASTER CYLINDER ASSEMBLY
51201
2.REMOVE FRONT SUSPENSION CROSSMEMBER SUB-ASSEMBLY
3.REMOVE BRAKE BOOSTER PUMP ASSEMBLY WITH BRACKET
Disconnect the 2 connectors from the brake booster pump assembly.
Separate the clamp from the brake actuator bracket assembly.
Remove the 2 bolts, No. 7 brake tube clamp and No. 1 brake tube clamp bracket.
| *1 | No. 1 Brake Tube Clamp Bracket |
| *2 | No. 7 Brake Tube Clamp |
| *3 | Front No. 1 Brake Tube |
Using a union nut wrench, disconnect the front No. 1 brake tube from the brake booster pump assembly.
Separate the wire harness clamp, 2 fuel lines and front No. 4 brake tube from the brake actuator bracket assembly.
| *1 | Wire Harness Clamp |
| *2 | Fuel Line |
| *3 | Front No. 4 Brake Tube |
Remove the 3 nuts and brake booster pump assembly with bracket.
47070
4.REMOVE BRAKE BOOSTER PUMP ASSEMBLY
Remove the 2 nuts, 2 brake traction actuator bracket bushings, 2 brake actuator case collars and brake booster pump assembly from the brake actuator bracket assembly.
| *1 | Nut |
| *2 | Brake Actuator Case Collar |
| *3 | Brake Traction Actuator Bracket Bushing |
| *4 | Brake Actuator Bracket Assembly |
| *5 | Brake Booster Pump Assembly |