Home › Brake › BRAKE SYSTEM (OTHER) › BRAKE PEDAL (for RHD) › from 2014.11
RM2070E _54 Brake _061924 BRAKE SYSTEM (OTHER) _0301698 BRAKE PEDAL(for RHD) A

BRAKE SYSTEM (OTHER)  BRAKE PEDAL(for RHD)  INSTALLATION  


PROCEDURE

Hide 47121 1.INSTALL BRAKE PEDAL PAD

Hide 47110 2.INSTALL BRAKE PEDAL SUPPORT ASSEMBLY

a.

Install the nut to the brake pedal support assembly.


b.

Install the brake pedal support assembly with the 4 nuts.

Torque:
13 N*m (130 kgf*cm, 9 ft.*lbf)


c.
C236044E01
3.043,0.589 3.196,0.739 0.154,0.150 10 *a

Install the brake pedal support assembly to the instrument panel reinforcement with the bolt.

Text in Illustration
*a Bolt Width

Bolt Variation Bolt Width
Bolt A 14 mm (0.551 in.)
Bolt B 12 mm (0.472 in.)

Torque:
for Bolt A : 14 N*m (140 kgf*cm, 10 ft.*lbf)
for Bolt B : 24 N*m (241 kgf*cm, 17 ft.*lbf)

HINT:

Two types of bolts each with a different torque specification are used.



d.

Engage the 2 clamps.


Hide 47264A 3.INSTALL PUSH ROD PIN

a.

Apply lithium soap base glycol grease to the push rod pin and installation hole of the brake pedal support assembly.


b.

Install the push rod pin and a new clip to connect the push rod clevis to the brake pedal support assembly.


Hide 4. ALIGN FRONT WHEELS FACING STRAIGHT AHEAD

Hide 45260 5.CONNECT NO. 2 STEERING INTERMEDIATE SHAFT ASSEMBLY

a.
C236160E01
0.566,1.319 0.723,1.468 0.157,0.149 10 *a 1.413,1.419 0.739,1.419 false 1.386,1.517 1.187,1.517 1.187,1.517 1.187,1.419 false

Align matchmarks on the No. 2 steering intermediate shaft assembly and steering intermediate shaft.

Text in Illustration
*a Matchmarks


b.

Connect the No. 2 steering intermediate shaft assembly to the steering intermediate shaft.


c.

Install the bolt.

Torque:
35 N*m (357 kgf*cm, 26 ft.*lbf)


Hide 45259A 6.INSTALL COLUMN HOLE COVER SILENCER SHEET

a.

Install the column hole cover silencer sheet with the 2 clips.


b.

Turn back the floor carpet.


Hide 47101A 7.INSTALL BRAKE PEDAL RETURN SPRING

a.

Install the brake pedal return spring to the brake pedal support assembly and push rod pin.


Hide 84345 8.INSTALL STOP LIGHT SWITCH MOUNTING ADJUSTER

Hide 84340 9.INSTALL STOP LIGHT SWITCH ASSEMBLY

Hide 73900 11.INSTALL LOWER NO. 1 INSTRUMENT PANEL AIRBAG ASSEMBLY

Hide 55045 12.INSTALL LOWER INSTRUMENT PANEL FINISH PANEL SUB-ASSEMBLY

Hide 58810J 13.INSTALL CONSOLE BOX ASSEMBLY

Hide 89650 14.INSTALL POWER STEERING ECU ASSEMBLY

Hide 15.INSPECT AND ADJUST BRAKE PEDAL

Hide 16. PERFORM INITIALIZATION AND CALIBRATION OF LINEAR SOLENOID VALVE

Hide 55606 17.INSTALL NO. 1 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY