1. ALIGN FRONT WHEELS FACING STRAIGHT AHEAD
89650
2.REMOVE POWER STEERING ECU ASSEMBLY
58810J
3.REMOVE CONSOLE BOX ASSEMBLY
55045
4.REMOVE LOWER INSTRUMENT PANEL FINISH PANEL SUB-ASSEMBLY
55606
5.REMOVE NO. 1 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY
73900
6.REMOVE LOWER NO. 1 INSTRUMENT PANEL AIRBAG ASSEMBLY
89510D
7.REMOVE BRAKE PEDAL STROKE SENSOR ASSEMBLY
84340
8.REMOVE STOP LIGHT SWITCH ASSEMBLY
84345
9.REMOVE STOP LIGHT SWITCH MOUNTING ADJUSTER
47101A
10.REMOVE BRAKE PEDAL RETURN SPRING
Remove the brake pedal return spring from the brake pedal support assembly and push rod pin.
45259A
11.REMOVE COLUMN HOLE COVER SILENCER SHEET
Turn back the floor carpet.
Remove the 2 clips and column hole cover silencer sheet.
45260
12.SEPARATE NO. 2 STEERING INTERMEDIATE SHAFT ASSEMBLY
Put matchmarks on the No. 2 steering intermediate shaft assembly and steering intermediate shaft.
| *a | Matchmark |
Remove the bolt.
Separate the No. 2 steering intermediate shaft assembly from the steering intermediate shaft.
47264A
13.REMOVE PUSH ROD PIN
Remove the clip and push rod pin to separate the brake pedal support assembly from the push rod clevis.
47110
14.REMOVE BRAKE PEDAL SUPPORT ASSEMBLY
Disengage the 2 clamps.
Remove the bolt and separate the brake pedal support assembly from the instrument panel reinforcement.
Remove the 4 nuts and brake pedal support assembly.
Remove the nut from the brake pedal support assembly.
47121
15.REMOVE BRAKE PEDAL PAD