Home › Brake › PARKING BRAKE › PARKING BRAKE CABLE › 2012.03–2013.08
RM2070E _54 Brake _061927 PARKING BRAKE _0301707 PARKING BRAKE CABLE A

PARKING BRAKE  PARKING BRAKE CABLE  INSTALLATION  


PROCEDURE

Hide 46430 1.INSTALL NO. 3 PARKING BRAKE CABLE ASSEMBLY

a.

Install the No. 3 parking brake cable assembly with the 5 bolts.

C351648

Torque:
6.0 N*m (61 kgf*cm, 53 in.*lbf)


b.
C233629

Install the No. 3 parking brake cable assembly to the parking brake plate sub-assembly with the bolt.

Torque:
8.0 N*m (82 kgf*cm, 71 in.*lbf)


Hide 47612 2.CONNECT PARKING BRAKE SHOE LEVER

Hide 57627A 3.INSTALL REAR FLOOR SIDE MEMBER COVER RH (for RH Side)

Hide 58153 4.INSTALL FRONT NO. 2 FLOOR HEAT INSULATOR

a.
C236265

Install the front No. 2 floor heat insulator with the 3 nuts.

Torque:
5.5 N*m (56 kgf*cm, 49 in.*lbf)


Hide 17410 5.INSTALL FRONT EXHAUST PIPE ASSEMBLY

Hide 46302 6.INSTALL NO. 1 PARKING BRAKE PULL ROD SUB-ASSEMBLY

a.
C233631E03
2.563,0.688 2.896,0.688 false 2.781,1.198 3.115,1.198 false 2.073,1.448 1.719,1.448 false 2.917,0.615 3.073,0.76 0.156,0.146 10 true *1 3.115,1.125 3.271,1.271 0.156,0.146 10 true *2 1.542,1.375 1.698,1.521 0.156,0.146 10 false *3

Connect the No. 3 parking brake cable assembly to the No. 1 parking brake pull rod sub-assembly as shown in the illustration.

Text in Illustration
*1 No. 1 Parking Brake Pull Rod Sub-assembly
*2 No. 2 Parking Brake Cable Assembly
*3 No. 3 Parking Brake Cable Assembly


b.

Connect the No. 2 parking brake cable assembly to the No. 1 parking brake pull rod sub-assembly.

HINT:

Perform the same procedure as for the No. 3 parking brake cable assembly.



Hide 46410 7.INSTALL NO. 1 PARKING BRAKE CABLE ASSEMBLY (for LHD)

a.

Pass the No. 1 parking brake cable assembly through the parking brake pedal assembly.


b.

Install the clip to the No. 1 parking brake cable assembly.


c.
C237809

Bend the parking brake pedal claw.


d.

Temporarily install the adjusting nut.


Hide 46410 8.INSTALL NO. 1 PARKING BRAKE CABLE ASSEMBLY (for RHD)

a.

Pass the No. 1 parking brake cable assembly through the parking brake pedal assembly.


b.

Install the clip to the No. 1 parking brake cable assembly.


c.
C236266

Bend the parking brake pedal claw.


d.

Temporarily install the adjusting nut.


Hide 46200 9.INSTALL PARKING BRAKE CONTROL PEDAL ASSEMBLY (for LHD)

Hide 46200 10.INSTALL PARKING BRAKE CONTROL PEDAL ASSEMBLY (for RHD)