Home › Steering › STEERING COLUMN › STEERING WHEEL
RM2070E _55 Steering _061929 STEERING COLUMN _0301716 STEERING WHEEL A

STEERING COLUMN  STEERING WHEEL  INSTALLATION  


PROCEDURE

Hide 45184 1.INSTALL LOWER STEERING WHEEL BOSS COVER

a.
C206252

Engage the 2 pins and 4 claws to install the lower steering wheel boss cover to the steering wheel sub-assembly.


Hide 84633 2.INSTALL CRUISE CONTROL SWITCH WIRE

Hide 4.INSTALL STEERING PAD SWITCH ASSEMBLY

Hide 45713A 5.INSTALL STEERING SHAKE DAMPER

a.
C206249

Install the steering shake damper to the steering wheel sub-assembly with the 2 screws.

Torque:
2.4 N*m (24 kgf*cm, 21 in.*lbf)


Hide 6.ALIGN FRONT WHEELS FACING STRAIGHT AHEAD

Hide 84307 7.ADJUST SPIRAL CABLE WITH SENSOR SUB-ASSEMBLY

Hide 45100 8.INSTALL STEERING WHEEL ASSEMBLY

a.
C241150E01
0.206,0.382 0.358,0.526 0.151,0.144 10 *a 1.71,0.456 0.387,0.456 false 1.718,0.623 0.683,0.623 0.683,0.623 0.683,0.456 false

Align the matchmarks on the steering wheel assembly and steering main shaft to install the steering wheel assembly.

Text in Illustration
*a Matchmark


b.

Install the steering wheel assembly set nut.

Torque:
50 N*m (510 kgf*cm, 37 ft.*lbf)


c.

Connect the connectors to the spiral cable sub-assembly.


Hide 9.CHECK STEERING WHEEL CENTER POINT

Hide 45130 10.INSTALL HORN BUTTON ASSEMBLY