71074S
1.INSTALL SEPARATE TYPE FRONT SEATBACK COVER (FRONT SEATBACK HEATER SUB-ASSEMBLY)
Using hog ring pliers, install fastening rubber to the separate type front seatback pad with 2 new hog rings.
| *1 | Fastening Rubber |
| *2 | Hog Ring |
Be careful not to damage the cover.
When installing the hog rings, take care to minimize wrinkles as much as possible.
Using hog ring pliers, install the separate type front seatback cover (front seatback heater sub-assembly) with 5 new hog rings.
Be careful not to damage the cover.
When installing the hog rings, take care to minimize wrinkles as much as possible.
2.INSTALL SEPARATE TYPE FRONT SEATBACK COVER WITH PAD
3.INSTALL FRONT SEAT ASSEMBLY